Overview of the equipment, continued
13EJECT
Press to eject a video cassette from the compartment.
14CH/TRACKING
(Up / Down)
Press to change the channel (channels stored in memory only) or to adjust the tracking.
15SLOW
(Up / Down)
Press to allow
16INPUT
Press to select between the VCR tuner and the Audio/Video Input jacks. (auxiliary).
17FF
Press to fast forward a video cassette.
18CM SKIP
Press during playback mode to skip commercials or program segments.
19TV/VCR
Press to select the TV or VCR tuner.
20PROGRAM
Press to go directly "TIMER RECORDINGS" in MENU.
21DISPLAY
Press to display the tape counter, clock and status mode on the TV screen.
22CHILD LOCK
Press to disable VCR usage or to protect set timer recordings, the unit can be locked so that the buttons on the VCR or remote control don't work.
23ATR
Press to remove any streaks from the picture automatically.
Overview of the equipment, continued
Installing the remote control batteries
1Open the battery compartment on the back of the remote control.
✔
• Do not mix different types of batteries, or mix an old and a new battery.
•Remove and replace weak batteries. Weak
batteries can leak and | 2 Install two AAA size batteries as shown. Make sure |
damage your controller. | the “+” and |
Dispose of batteries |
|
properly; never throw | + |
them into a fire. | – |
| – |
| + |
3Replace the cover.
Using the remote control
Hold the remote control within an angle range of about 30° from either side of the remote sensor. The remote control range is about 23 feet (7m) from the VCR.
Point the front of the remote control directly at the front of the VCR.
5 | Daewoo Video Cassette Recorder User’s Guide | Daewoo Video Cassette Recorder User’s Guide | 6 |
