Setting up your VCR, continued
Setting up your VCR, continued
7Press Menu to save the settings and exit from the Time and Date Set menu.
8Press MENU again to exit the menu system and return to normal viewing.
Selecting cable or antenna viewing
You must set the viewing mode for your VCR, choosing either CABLE (cable system connection) or ANTENNA (antenna connection). To set the viewing mode:
1Press MENU to display the menu.
2Press 3 to select Channel Set.
✔
•Detect Automatically
;A strong cable or antenna signal in your area may cause Auto Detect to
If this should happen, select 1 or 2 for the system you have.
Setting channels automatically (Auto Channel Search)
Make sure that you use the auto channel search feature during daytime broadcast hours. If you use the auto channel search feature at late night, you may eliminate channels that air only daytime programming.
1Press MENU display the main menu.
2Press 3 to select Channel Set.
3Press 1 to select Auto Channel Search mode and press 3 to detect the channel automatically and the scanning channel number appears. Wait until the channel numbers stop changing (one to two minutes), and one of the memorized channel appears.
3Press 3 to toggle the setting between CABLE and ANTENNA. When the desired viewing mode is displayed, press MENU twice to exit.
Programming the channel memory
The VCR’s channel memory determines the channels that
are visible when you press CH/TRACKING 
. You can add or remove channels from memory.
4Press CH/TRACKING 
to view the memorized channels.
Removing channels manually
To erase a channel manually,
1Press MENU to display the menu.
2Press 3 to select Channel Set.
15 | Daewoo Video Cassette Recorder User’s Guide | Daewoo Video Cassette Recorder User’s Guide | 16 |
