Daewoo DVG - 8400N, DVG - 5300N Control Panel IC Material, Decal PIN Function Description

CONTROL PANEL IC MATERIAL

DECAL

PIN FUNCTION DESCRIPTION

Pin No.	Symbol	Pin Name	Description
6	DIN	Data input	Inputs serial data at rising edge of shift clock, starting from lower
			bit.
5	DOUT	Data output	Outputs serial data at falling edge of shift clock, starting from
			lower bit. This is N-ch open-drain output pin.
9	STB	Strobe	Initializes serial interface at rising or falling edge to make
			Pd16312 waiting for reception of command. Data input after
			STB has fallen is processed as command. While command data
			is processed, current processing is stopped, and serial interface
			is initialized. While STB is high, CLK is ignored.
8	CLK	Clock input	Reads serial data at rising edge, and outputs data at falling edge.
44	OSC	Oscillator pin	Connect resistor for determining oscillation frequency to this pin.
15 to 20	Seg1/KS1 to	High-voltage output	Segment output pins (Dual function as key source)
	Seg6 /KS6
37 To32	Grid1 to Grid6	High-voltage output (grid)	Grid output pins
26,28 to 31	Seg12/Grid11 to	High-voltage output	These pins are selectable for segment or grid output.
	Seg16/Grid7	(segment/grid)
42 to 39	LED1 to LED5	LED output	CMOS output. +20 mA max.
10 to 13	Key1 to Key4	Key data input	Data input to these pins is latched at end of display cycle.
1 to 4	SW1 to SW4	Switch input	These pins constitute 4-bit general-purpose input port.
14, 38	VDD	Logic power	± 10 %
7, 43	VSS	Logic ground	Connect this pin to GND of system.
27	VEE	Pull-down level	VDD − 35 V max.
21 to 25	Seg7 to Seg11	High-voltage output	Segment output pins.

4-13