Normaltimerrecording

DV6T711P-AP(DESUK)1 02.7.24 11:17 AM ˘ ` 37 mac001 300DPI 120LPI

For timer recordings, clock, date, and stations must be set correctly.

Load a cassette with its safety tab in place and with sufficient free space for the recording.

• the day of the broadcast, if it is not today.•Wait a few seconds after typing a one-digit-number.•The recorder will eject cassettes which have the safety tab removed.Manual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundNormalManual backgroundtimerManual backgroundManual backgroundrecordingManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual background

1

Call the player’s "MAIN SETUP", choose "TIMER

PROGRAM".

Decide if you want to record "ONCE", "WEEKLY" or

"DAILY"...

... and confirm.

 

2

Type in one after the other:

• The programme location number;

• the time the broadcast starts,

• the time the broadcast ends,

• the day of the broadcast, if it is not today.

Select LP if you wish to make a very long

recording .

• Switch off PDC here if you need to .

HOW OFTEN DO YOU WANT TO RECORD THIS PROGRAM?

Manual background ONCE

WEEKLY(ONCE A WEEK)

DAILY(MON-FRI)

DAILY(MON-SAT)

DAILY(MON-SUN)

PR+/-:SELECT

 

OK:CONFIRM

SETUP:END

 

 

TIMER PROGRAM (ONCE)

PR

--

START TIME

--:--

END TIME

--:--

START DATE

--/--

TAPE SPEED

SP

PDC/VPS

ON

PR+/-:SELECT(AV1/AV2)

0-9 :SETUP(PR) </>:CORRECT SETUP:END

VCR Operation

3

If you wish to make changes:

Move to the position you want to change using the

[< / >] buttons. Change the setting using the [PR+/- ]

or [number] buttons.

If all setting are ok, press [< or >], till you see “OK :

CONFIRM” in the bottom line.

Confirm.

Switch your player off.

TIMER PROGRAM (ONCE)

PR

01

START TIME

18:10

END TIME

20:30

START DATE

22/03(FRI)

TAPE SPEED

LP

PDC/VPS

ON

PR+/-:SELECT(AV1/AV2)

0-9 : SETUP (PR)

 

</>:CORRECT

 

OK:CONFIRM

SETUP:END

CHECK UP!

Wait a few seconds after typing a one-digit-number.

If you have made a mistake, move to the position you want to change using the [< / >] buttons and change the setting.

If programme timings overlap, the machine will give a warning message. If you don’t adjust the times, the machine will record the first programme completely then continue with the second one.

If there is no sufficient free space for the recording on the cassette the video switches automatically to “LP” for double recording capacity.

The recorder will eject cassettes which have the safety tab removed.

37

Page 38
Image 38
Daewoo SD-8100P, SD-2100P owner manual Normaltimerrecording, the day of the broadcast, if it is not today