System Overview

8.Interrupt Controller (INTC)

-FIQ or IRQ mode operation selectable

-Programmable Interrupt Enable/Disable

9.USB interface

-Version 1.1

-Four 128x8 FIFOs for Data transmission.

-Interrupt based input / output interface, no DMA based interface support

-USB wrapper for AHB interface

-AHB Bus interface

10.Serial port interface (UART)

-Programmable Baud Rate

-2 channel Independent Full Duplex UART

-Polling, Interrupt based operation support

-Max 16 byte FIFO to handle SIR Bit Rate Speed

11.Printer video controller for LBP engines (PVC)

-80MHz video rate (Hummingbird 2 : letter - 21 ppm, A4 : 20ppm)

-video data transmitted through LSU Controller

12.Laser Scan Unit (LSU) Controller

-Laser Scan Unit (LSU) Interface for Laser Diode turn on/off timing control

-Sample & hold period generation.

-Auto Power Control for Laser Diode with PID control method using internal 10 bits DAC.

-LSU clock generation

-Brushless DC motor control clock generation

13.ADC Interface

-4 channels ADC interface for analog devices such as temperature sensor.

-Programmable ADC Clock Cycle.

-Automatic or Manual AD Conversion support.

-4 Special Function Registers for monitoring the ADC results for 4 channels.

14.PWM Controller

-4 PWM output ports - THV, BIAS, FAN control and AC ELECTRIFICATION

15.Bi-polar Stepper Motor controller (MOTORC)

-Phase generation for the purpose of paper feeding

-fixed hardware phase and current table

-programmable phase and interval time

-Interrupt based phase change operation

16.Timer

-3 Independent Programmable Timers

-Watch Dog Timer for S/W Trap

17.Miscellaneous

-Mux controlled 24 GPI, 28 GPO & 5 GPIO ports .

-Mutual exclusive GPO/GPIO ports control by the port control enable register

-Programmable Bus Master Priority.

-Project code added.

3-12Service Manual

Samsung Electronics

Page 26
Image 26
Samsung ML-2015/XEV Interrupt Controller Intc, USB interface, Serial port interface Uart, Laser Scan Unit LSU Controller