Samsung ML-2015/XEV manual Bad discharge, Wrong Print Position, 2 JAM, Check and Cause Solution

Troubleshooting

6.2 Bad discharge

6.2.1 Wrong Print Position

•Description Printing begins at wrong position on the paper.

Check and Cause	Solution
Wrong sense time caused by defective feed sensor	Replace the defective actuator
actuator.

6.2.2 JAM 0

• Description

1. Paper is not exited from the cassette.

2. Jam-0 occurs if the paper feeds into the printer.

BIN PATH

	Check and Cause		Solution
1.	Check the Solenoid by using DCU diagnostic mode	1.	Replace the solenoid.
	06.
2.	Check if the pad is loose due to bad sealing of the	2.	Replace the side-pad Assembly L or R, if necessary.
	side-pad.
3.	Check the surface of the roller-pickup for foreign mat-	3.	Clean with soft cloth dampened with IPA(Isopropyl
	ter.		Alcohol) or water.
4.	If the paper feeds into the printer rand Jam 0 occurs,	4.	Replace the SMPS, HVPS or Sensor.
	perform DCU to check feed-sensor of the engine
	board.

6-4Service Manual

Samsung Electronics