Daewoo SD-8500P, SD-8800P owner manual Tuning in New Stations, To Copy From DVD To Videotape

Recording

To Copy From DVD To Videotape

1 Insert the desired DVD disc.

Tuning in New Stations

■The TV and player are switched on.

■To see the picture from your player, press the station button on the TV reserved for player input or the AV (Audio / Video) button.

■"AV1/2" should not be selected with the AV button on the player.

When the DVD disc is copyright protected, you can’t copy it. If DVD disc is not copy protected then insert a blank tape.

2 Press [REC] button during playing of DVD.

DVD plays and VCR starts recording.

3 If you press STOP [ ] button in DVD mode, DVD and VCR will stop at the same time.

Tuning

To complete the set-up of your video recorder when the

1 auto set has not stored all of the channels or when you wish to store a new channel.

PR PRESET

AUTO SET MANUAL SET PR ERASE PR ALIGN

If you press STOP [ ] button in VCR mode, VCR stops to record and DVD continues to play.

N.B.

This product incorporates copyright protection technology that is protected by method claims of certain U.S patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.

Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

2

Call the video’s "SETUP", choose "PR PRESET".

Select "MANUAL SET".

PR+/-:SELECT

OK:CONFIRM SETUP:END

MANUAL SET

PR01 BBC1	PR08 SKYS
PR02 BBC2	PR09 MTVE
PR03 ITV	PR10 P-10
PR04 CHA4	PR11 P-11
PR05 SKY1	PR12 ----
PR06 SKYN	PR13 ----
PR07 SKYM	PR14 ----

PR+/-:SELECT

OK:CONFIRM SETUP:END

VCR

One Touch timer Recording (OTR)

■Should you want to record (for a timed period) whilst watching TV or you want to record the current TV program for the desired time, follow the procedures below.

1 First, follow the steps 1 to 4 in “Recording With VCR”.

2 Press [REC] button reference the “Recording Times Table” below.

Once	continuous recording until you press STOP button
Twice	recording for 30 mins from current time
3 (times)	recording for 1 hour

Incrementing recording for 30 mins at each press.

9recording for 4 hours

and so on

3 To stop Recording, press [STOP] button more than 5 seconds.

3	Choose any unused programme number "----" or "P-xx" ...
	It's best to use the same programme number on both the TV
	and video.
	... and confirm by selecting “OK” button.
4	Set the station you want:
	• the programme number;
	• the broadcast system you want (Aerial (CH) or Cable
	(CC)),
	• You can directly enter the real channel number with the
	[0 to 9] buttons, or search by pressing [< / >],
	• The fine tuning you can adjust,
	• When the program is encoded (and you have a decoder
	connected to socket EURO AV2), press the [< or >] to
	select ON or OFF.
	• Change or create the station name.
5	Once you see the station you want, store it by selecting OK.
	Tune in further stations (from step 3 onwards) or exit

tuning mode.

MANUAL SET

PR	04
RECEPTION	AERIAL
AUTOSEARCH	CH_ _
FINE TUNING
DECODER	ON
NAME	_ _ _ _
PR+/-: UP/DOWN
</>: SELECT
OK:CONFIRM	SETUP:END
MANUAL SET
PR	03
RECEPTION			AERIAL
AUTOSEARCH			CH 03
FINE TUNING
DECODER			ON
NAME	_ _ _ _
PR+/-: UP/DOWN
</>: SELECT
OK:CONFIRM		SETUP:END

MANUAL SET

PR	03
RECEPTION	AERIAL
AUTOSEARCH	CH_ _
FINE TUNING
DECODER	ON
NAME	_ _ _ _

PR+/-: UP/DOWN

0/1: CHANGE/CREATE

OK:CONFIRM SETUP:END

Operation

24 25