Operation: (Always test unit prior to installation) The control box is powered by one
Coding the transmitter:
Note: The transmitters and receivers are preset at the factory. DO NOT change settings, unless changing the tune or experiencing false signals.
1.Open the transmitter box.The first thing you will see is the air switch (Figure 2). Directly below the air switch is the transmitter’s radio (Figure 3).
2.Locate the dip switches on the radio (2)(3).
3.Switches
4.Switches 9 and 10 (3) are for the channel setting on the transmitter. Use these to set the tone you prefer. The four channels are listed in the table on page 5.
3+
feet
figure 1
3.
