Dakota Alert ir-3000, dakota alert,inc. wireless pir sensor owner manual

2.Locate the 10 dip switches on the transmitter module (figure 3).

3.The first eight dip switches are for the frequency setting (256 combinations). Set switches 1-8 (figure 3-3) to match the eight switches in the receiver.3. Switches 9 and

10(figure 3-4) are for zone/channel setting on the transmitter. The four zones are listed below.

Switch	Switch	Channel	12-volt	Tune
9	10		DC output
On	On	1	Yes	Classical
Off	On	2	No	Westminster
On	Off	3	No	Ding Dong
Off	Off	4	No	Whistle

{ {

3 4

figure 3

Low battery alert: If the receiver sounds a second alert 30 seconds after the first alert, provided nothing trips the transmitter again, the 9-volt battery in the transmitter should be changed.

4.