Caractéristiques de télécommande

Affichage Électronique: Affiche l’information suivante;

A:Icônes du Télécommande ‘En Marche’ et Mode.

B:Horloge et Minutrie

C:Réglage de la température

D:Réglage de Vitesse du ventilateur

Boutons De Commande:

1.Commutateur de courant

2.Mode

3.Vitesse du ventilateur

4. Économiseur d'Énergie

Affichage

 

 

 

Électronique

A

 

 

 

 

 

B

 

C

 

 

D

 

1

 

 

 

2

 

 

3

 

 

 

MODE

 

 

 

4

 

 

5

6

 

©

7

 

 

 

 

 

8

 

 

9

 

 

 

 

 

 

11

Energy-Saving Tips

Your Room Air Conditioner is designed to be highly efficient in energy savings.

Follow these recommendations for greater efficiency.

1.Select thermostat setting that suits your comfort needs and leave thermostat at that chosen setting.

2.The filter is very efficient in removing airborne particles. Keep air filter clean. Normally, filter should be cleaned every 2 weeks. More frequent cleaning may be necessary depending on indoor air quality.

3.Use drapes, curtains, or shades to keep direct sunlight from heating room, but DO NOT obstruct the air conditioner. Allow air to circulate around the unit without obstruction.

4.Start your air conditioner before outdoor air becomes hot and uncomfortable. This avoids an initial period of discomfort while unit is cooling off the room.

5.When outdoor temperatures are cool enough, use HIGH or LOW FAN only. This circulates indoor air, providing some cooling comfort, and utilizes less electricity than when operating on a cooling setting.

5.Minutrie

6.Utilisé pour augmenter ou réduire le température par incréments de 10 et le minuterie en incréments de 0.5 hr jusqu’a 10 heures et incréments de 1 hr jusqu’a 24 heures.

7.Annuler le programme “Minutrie en Marche” et/ou “Minutrie Arrêt”.

8.Serrure empêche les arrangements de télécommande d'être changé.

9.Horloge: Appuyez sur le bouton pendant 3 secondes

pour régler l'horloge. Appuyer sur la flèche ou pour ajuster l'horloge en les incréments de 1 minute, ou continuez à maintenir la flèche pour ajuster le temps en incréments de 10 minutes.

10.Mode de Sommeil.

11.Lumière d’affichage électronique (allumez/arrêtez)

12.Reconstituez tous les arrangements de télécommande au réglages par défaut.

10

12

 

Deux piles alcalines « AAA » sont requises pour le fonctionnement de la télécommande (incluses).

Les piles devraient être remplacées quand :

a)Aucun signal sonore (bip) n’est entendu durant la programmation de l’unité principale.

b)L’unité principale ne répond pas à un signal émis par la télécommande.

Remplacement des piles :

1.Glisser le couvercle du compartiment des piles à l’arrière de la télécommande dans le sens de la flèche. Tirer délicatement jusqu’à ce que le

couvercle se sépare complètement de l’unité.

2.Insérer deux (2) piles (AAA) en observant la polarité indiquée dans le compartiment des piles (+/-).

3.Réinstaller le couvercle.

4.Si la télécommande ne sera pas utilisée pour des périodes prolongées (vacances, etc.), les piles devraient être retirées de la télécommande.

La télécommande fonctionnera en dedans d’une distance de 8 mètres (26 pi.) du récepteur situé à l’intérieur de l’unité principale. Toute obstruction entre le récepteur et la télécommande pourrait causer une interférence au signal, ce qui limiterait la capacité de programmation de l’unité principale.

Installation Notes

Electric Shock Hazard

To avoid the possibility of personal injury, disconnect power to the unit before installing or servicing.

Tools Needed for Installation

Screw Drivers: Both Phillips and flat head

Power Drill: 1/8 inch (3.2 mm) diameter drill bit

Pencil

Measuring Tape

Scissors

Carpenters Level

CAUTION

To avoid installation/operation difficulties,

read these instructions thoroughly.

Your Room Air Conditioner is designed for easy installation in a single or double-hung window. This unit is NOT designed for vertical (slider type) windows and/or through-the-wall applications.

NOTE: Save the shipping carton and packing materials for future storage or transport of the unit. Remove from carton, the plastic bag containing the installation hardware kit necessary for the installation of your air conditioner. Please check the contents of hardware kit against the corresponding model check list, prior to installation of the unit. See Fig. 1

Installation Hardware

3/4" (19.1 mm)

Safety Lock (1)

Screws (7)

 

*3/8" (9.5 mm) Screws

*“L” Shaped

mounting bracket

(4)

(1)

*Factory installed on

some models.

*Factory installed

 

 

on some models.

 

Sash bracket (2)

Adhesive

 

Foam Seal (1)

 

Side Curtain RH (1)

Side Curtain LH (1)

 

Fig. 1

 

19

4

Page 5
Image 5
Danby DAC10066DE Energy-Saving Tips, Installation Notes, Installation Hardware, Caractéristiques de télécommande

DAC8006DE, DAC12060DE, DAC6006DE, DAC7006DE, DAC12666DE specifications

Danby is a prominent name in the home appliance industry, known for producing high-quality and reliable dehumidifiers. The models DAC10066DE, DAC12666DE, DAC8006DE, DAC7006DE, and DAC12060DE are all part of their flagship line, designed to combat excessive humidity in homes and offices, ensuring a comfortable living environment.

The DAC10066DE is a robust unit with a capacity of 70 pints per day, making it suitable for larger spaces. It features a smart dehumidification technology that adjusts the operating efficiency according to room conditions, enhancing energy savings. A continuous drainage option simplifies maintenance, while the auto restart function ensures the unit resumes operation after a power outage.

Next in line, the DAC12666DE boosts the dehumidification power to 50 pints per day, targeting typical humidity problems in medium-sized areas. It comes equipped with an energy efficient compressor and an adjustable humidistat. The large tank capacity minimizes the frequency of emptying, while the easy-roll caster wheels allow for flexibility in placement.

For smaller spaces, the DAC8006DE with its 30 pints per day capacity is perfect. This compact model does not compromise on performance and features an auto-restart function, ideal for unexpected power failures. The quiet operation makes it suitable for bedrooms or study areas while the removable filter makes maintenance effortless.

The DAC7006DE also caters to smaller areas, offering a 50-pint capacity. It incorporates a full-tank indicator and a washable air filter to ensure clean air circulation. The digital display and touch controls simplify operation, making it user-friendly for individuals of all ages.

Lastly, the DAC12060DE is another considerable option with a 60-pint capacity ideal for larger rooms or damp basements. This model focuses on energy efficiency without sacrificing performance, incorporating a programmable timer and a built-in pump for continuous drainage options. Its sleek design is complemented by a user-friendly control panel, making it a practical and efficient choice for any household.

Overall, each of these Danby dehumidifiers offers unique features tailored for different needs, ensuring a healthy indoor environment by reducing moisture levels effectively. Whether for large or small spaces, Danby’s commitment to quality and technology makes these models reliable solutions for humidity control.