OPERATING INSTRUCTIONS
Drying
Drying program selection elements are set in the control panel as well as the indicator light which is on during the operation of the machine.
Preparing the Laundry for Drying
•Sort the laundry before drying according to type of the laundry.
•Fasten buttons, zippers, tie loose strings and turn pockets inside out.
•Very delicate laundry (fine underwear with laces) should prior to drying be put in a special sack so that it won't get damaged by buttons, zippers and pins.
•We recommend loading the drum with items of different size. Larger pieces of laundry can get tucked during drying. So we recommend you take them out, shake them and then put them back.
•When drying large sheets (bed sheets, table cloths) put 2 to 3 pieces for one load and when drying delicate smaller items (shirts, blouses) fill only 5 to 6 pieces for one load (max 4,5 lbs).
•Never put dripping wet laundry inside the dryer. (electrical hazard)
•Most clothes nowadays have labels marked with recommended drying mode.
DRYING
Drying in tumble drier allowed
Wring, hang on clothes line and dry
No wringing, drip dry
Wring, dry flat
Drying in tumble drier not allowed
Drying at normal temperature
Drying at lower temperature
ON – OFF button
The appliance is switched on and off by pushing the ON/OFF button.
Signal lamp operation
Signal lamp illuminates when the appliance is in operation.
Prior drying
•Switch the dryer on by pressing the ON/OFF button.
•Before first selecting a drying program, set the program selector knob to the STOP/0 position. (for 1 second)
•Set the program selector knob to the desired drying program. The signal lamp, adjacent to the selected program will illuminate. (except when using timed dry programs)
•Press the "START" button to start the program. The beginning of operation is signaled by a beep. The program signal light goes off and actual humidity level indicator light turns on.
•If you wish to change the selected drying program after the machine has been put into operation, set the program selector knob back to the STOP/0 position. (for 1 second) You may select any desired drying program, and start it by pressing the START button. In case this procedure is not performed, the machine will continue executing the originally selected program, notwithstanding the position of the program selector.
•If the preceding program has been completed (indicator light END and
Drying program selection button
The appropriate program is selected by operating the program selector knob, which may be turned in either direction. There is a basic choice of three drying groups:
Regular laundry (5 programs), with automatic moisture measuring
Delicate laundry (4 programs) with automatic moisture measuring
Preset (timed) drying for both resistant and delicate laundry
10 | Instructions for Use |
