Danby DCD5505W-1 Positioning and Installation, Choosing the Right Place, Moist Air Outlet

INSTALLATION INSTRUCTIONS

Positioning and Installation

Your clothes dryer must be placed in a room with adequate ventilation.

Choosing the Right Place

The most appropriate space is a room with a window or built-in ventilation fan (Figure 1).

In closed, smaller rooms without adequate ventilation there is too much moisture in the air, the drying time is increased and so is energy consumption.

If during the drying procedure there isn't adequate ventilation in the room, we recommend you direct moist air out in the open by means of vent pipe (Fig. 2).

1 2

Vent pipe can be bought in any local hardware store.

Moist Air Outlet

The ventilation opening for venting out humid air, is located at the rear side of the dryer. Fig. 4-5 (bottom left-hand corner) The ventilation opening is designed to accept standard 4 inch, flexible or solid exhaust pipe. (not included with the dryer) The ventilation exhaust can be purchased at any local hardware store.

The distance between the dryer and venting opening (air duct or window) must not exceed 80 inches, otherwise condensation can accumulate in the tube, (Fig 5).

1 Solid Piping

2 Flexible pipe

Positioning

This dryer is a self standing appliance and can stand alone, or it can be placed either together with a washing machine or in the kitchen as a kitchen unit.

If the floor is uneven, use the adjustable feet to level the machine.

3 3a

Undo the nuts. Rotate the feet to level the machine (fig. 3).

Lock the nuts (fig. 3a).

•Do not remove the adjustable feet. The machine must be placed horizontally.

•Do not put the dryer on a thick rug thus preventing the possibility of air circulation.

6 Instructions for Use