USER-MAINTENANCE INSTRUCTIONS

Cleaning and Maintenance

Before cleaning, always disconnect the appliance from power supply.

Exterior Cabinet

Wipe the cabinet with a soft wet cloth and mild cleaning agent. Do not use aggressive cleaning agents which could damage the paint surface.

Cleaning dryer

If your drier is installed in a room with poor air circulation or if operates daily, dust deposits will accumulate in the interior bottom of the appliance and in the ventilation exhaust pipe. This accumulation of dust can lead dryer malfunctions. So once a year, clean the dust in the interior of the drier with a damp cloth and check the exhaust ventilation for blockage.

Cleaning procedure

Disconnect the dryer from the power supply.

Undo the screws and remove the cover (B).

Clean (with a vacuum cleaner) the bottom of the drier and parts on the bottom.

Reinsert the cover in reverse order.

Lint Filter

After each drying cycle, remove the lint filter trap located inside the inner door and gently wipe over the filter with a soft cloth or soft brush to remove any accumulated lint. Clean the filter cabinet as well.

The lint filter can also be cleaned under running water; however, it must be thoroughly dried before being replaced.

NOTE

The accumulation of lint on the lint filter is a consequence of normal (wear and tear) laundering and has nothing to do with drying in the machine.

Instructions for Use

13

Page 14
Image 14
Danby DCD5505W-1 Cleaning and Maintenance, Exterior Cabinet, Cleaning dryer, Cleaning procedure, Lint Filter