Danby DPAC10030 manual Fan Operating Instructions, High, I/O Mode

Fan Operating Instructions

NOTE: The exhaust hoses are not required during FAN only mode operation.

The external water tank is not required during FAN only mode operation.

1)Press the I/O (on/off) key pad to switch on the unit.

2)Press the MODE key until the word FAN appears in the display window. Each depression of the MODE key will advance to a different mode setting (Cool-Dry-Fan).

3)Press the FAN key to select the desired FAN SPEED setting. Your selection will appear in the display window. Each depression of the fan key will advance to a different fan speed (Low-Med-

High).

4)Press the SWING key to activate the automatic air swing (oscillating) feature (the air swing symbol will appear in the display window).

To deactivate the air swing feature, press the SWING key again.

5)To adjust “air flow” direction, (up / down only) adjust the center Horizontal Louver Blade and the remaining louvers will automatically adjust to the same position. Fig. 25

Fig. 25

I/O MODE

13