TROUBLESHOOTING
Occasionally, a problem may occur that is minor, and a service call may not be necessary. Use this troubleshooting guide for a possible solution. If the unit continues to operate improperly, call an authorized service depot for assistance, or Danby’s Toll Free Number: 
PROBLEM | POSSIBLE CAUSE | SOLUTIONS | |
| • Power is out. | • Wait for power to return. | |
| • The plug is not plugged in properly. | ||
1) Unit does not work | • Plug in properly. | ||
• The | • Remove drain water from the drain | ||
| full. | tank. | |
| • Current leaking or pressing test | ||
| • Press the reset button after resolving | ||
| button on LCDI plug. | ||
| problem. | ||
|
| ||
|
|
| |
| • Indoor set temperature has been | • Reset the temperature level. | |
2) Unit suddenly stops during operation. | reached. | ||
• Reset the timer. | |||
| • The preset time is up. | • Remove drain water from the drain | |
| • The | ||
| full. | tank. | |
|
| ||
|
|
| |
3) Unit runs intermittently | • Malfunction. | • Contact your dealer. | |
• Surrounding temp. is too high/low. | • This is normal. | ||
| |||
| • Exhaust duct hose is blocked. | • Check the duct hose. | |
|
|
| |
| • Window or door is open in room. | • Close all windows/doors. | |
4) Unit functions but the room is not | • There is a heat source or too many | ||
people in the room. | • Move any heat sources from room. | ||
cooled. | • Air intake grill is clogged. | • Clean air intake grill. | |
| • Filter is too dirty. | • Replace the filter. | |
| • Temperature setting is too high. | • Lower temp. setting. | |
|
|
| |
5) Condensed water spills out when | • The tank is nearly full. | • Remove drain plug on rear bottom | |
moving the unit. | and drain out water. | ||
| |||
|
|
|
9
