OPERATION
Warning Light 
Receiving Sensor
KEY PAD FUNCTIONS
POWER SWITCH: Turns unit ON/OFF
MODE: Allows you to scroll through and select desired operating mode.
FAN: Select from three different fan settings; High, Medium, and Low.
AUTO-TIMER
AUTO TURN OFF- With machine in running mode,
press timer button to set timer control. Press 
buttons to select number of hours you would like the unit to run before it automatically shuts off.
AUTO TURN ON- With machine in stand by mode,
press timer button to set timer control. Press 
buttons to select number of hours before the unit automatically starts running in air conditioning mode.
NOTE: The time is adjustable between 1-24 hours.
TEMPERATURE Adjust:
•Used for adjusting the thermostat.
•The default display is room temperature.
•In cooling mode, when 
button is pressed, the set temperature is displayed and may be adjusted. After 15 seconds the display will revert back to room temperature. Temperature is only adjustable in cool mode.
NOTE: By pressing both 
buttons at the same time for more than 3 seconds, the display will toggle between Celsius and Fahrenheit.
Warning Light
Condensed water may accumulate in the unit. If the internal tank becomes full, the Warning signal in the LCD Display will light up and the unit will not operate until it has been drained.
LCD Display
Cooling Mode
Dehumidify Mode
Fan Only Mode
High Fan Speed
Medium Fan Speed
Low Fan Speed
Display Set Temperature
Display Timer Setting of Auto Switch ON /
OFF
Warning Light (the machine will stop
running)
5
