Setting 28x Printer Configuration Options
The following procedure tells how to change the 28x printer configuration to work with the printer driver for Windows 95 or 98. The instructions begin at the main menu of the printer’s display window.
Setting Customer Engineer Configuration Options
1.At the Datacard 28x printer front panel, press Esc to go to the Main Menu.
2.Press F3 to choose Set Up.
3.Select F3 to choose Customer Engineer.
4.When prompted for an access code, press F2 and then F1.
5.Press F1 to choose the configuration menu.
6.Verify and set the configuration options identified below. Use the function keys (F1, F2, and F3) to scroll through menus, select a menu, select menu options, and save options.
Configure Menu option | Value to select or enter |
System Page Select | System Page Menu |
| Page = CPX Format |
| Use High Baud Rate = On |
| Baud Rate Menu |
| Baud = 57600 |
| NAK Busy Used = On |
| Send Pause Status = On |
|
|
Host Comm. | Data Bits and Parity Menu |
| Parity = 8 bit None |
| Ignore Transmit Error = On |
| Use Comm. Translation Table = Off |
|
|
Check Card Limits Error | Card Limits Error = On |
|
|
For
7.Press Esc twice to return to the Set Up Menu.
Windows 95 and 98 Printer Driver Installation and Technical Reference | 13 |
