Datacard Group CP40 manual

5Load the new roll of print ribbon on the cartridge.

—Put the full spool of ribbon on the supply spindle of the ribbon cartridge. Push until the spool clicks onto the spindle.

—Put the empty take-up spool on the spindle with the solid black gear. Push until the spool clicks onto the spindle.

6Replace the loaded ribbon cartridge in the printer.

—Make sure both spindles rest in the black supports on the left side of the printer.

—Make sure the ribbon cartridge handle rests in the supports on the right side of the printer.

—Make sure to install the full, new spool toward the input hopper of the printer.

7Close the printer cover. Press down firmly to latch it.

Page 8