Datamax I-4208, I-4206 manual Media and Ribbon Requirements, Printing Specifications

Printing Specifications (continued)

Print Length Range:	.25” – 99” (6.4 mm – 2514.6 mm) I-4206,I-4208,
		I-4212, I–4308
	.25” – 84”	(6.4 mm – 2133.6 mm) I-4406
	.25” – 55”	(6.4 mm – 1397 mm) I-4604

with an optional cutter:

with an optional peel & present mechanism:

1.25” – 99” (31.8 mm – 2514.6 mm) I-4206,I-4208,I-4212,I–4308

1.25” – 84” (31.8 mm – 2133.6 mm) I-44061.25” – 55” (31.8 mm – 1397 mm) I-4604

1.50” – 99” (38 mm – 2514.6 mm) I-4206,I-4208,I-4212,I–4308

	1.50” – 84” (38 mm – 2133.6 mm) I-4406
	1.50” – 55” (38 mm – 1397 mm) I-4604
Print Justification:	Left
Flash Memory:	1 MB I-4206, I-4208
	2 MB I-4212, I–4308, I-4406, I-4604
SDRAM Memory:	8 MB I-4206, I-4208

16MB I-4212, I–4308, I-4406, I-4604

7.1Media and Ribbon Requirements

Media Types:	Roll-Fed, Die-Cut, Continuous, and Fan-Fold. Flat
	on the printable side with no more than .0007”
	(.018 mm) protrusions on the opposite side.
Media Roll Capacity*:	8” (203 mm) outer diameter
Media Core:	1.5” or 3.0” (38 mm or 76.2 mm) inner diameter
Ribbon Core:	1.010” .006” (25.6 mm .2 mm) inner diameter.
	Core not to protrude beyond ribbon edge.
Ribbon Width Range**:	1.0” – 4.5” (25.4 mm – 114.3 mm)
Ribbon Length**:	1968’ (600 meters) maximum

*Wound out labels only.

**Coated side ‘in’ or ‘out’ are NOT interchangeable, but dependent upon the Ribbon Supply Hub type. Also, the ribbon width should slightly exceed label width (including the backing material) to protect the printhead.

I-Class 105