Datamax I-4208, I-4206 manual Using Key Selection is Select the Gain Number

Advanced Entry Calibration (continued)

Step	Operator Action			Displayed Message	Comment
13	Using the		Key,		Selection is
	select the Gain Number			HBJO!USBO!!!!!!=zzz?	denoted with an
				+19!!!!!!!!!)1!.!42*
	determined in Step 12.				‘*’.
	Press the		Key to	Or, for reflective media:
	select the setting.
				HBJO!SFGM!!!!!!=zzz?
				+19!!!!!!!!!)1!.!42*
14	n Place the media in the				Where ‘yyy’ is
				HBJO!USBO!!!!!!=zzz?
	Media Sensor. Record				a numerical
				+19!!!!!!!!!)1!.!42*
	the sensor reading and				value
	label it	‘P’ (paper).		Or, for reflective media:	representing the
	o Place the backing, mark,				current sensor
				HBJO!SFGM!!!!!!=zzz?	reading.
	or notch in the Media
				+19!!!!!!!!!)1!.!42*
	Sensor. Record the
	sensor reading and label
	it ‘G’ or ‘M’ (Gap or
	Mark).

pRemove all media. Record the sensor reading and label it ‘E’ (Empty).

15 Press the	Key.		The sensor
		BEWBODFE!FOUSZ
Then press the		TFOTPS!MFWFMT	readings must
Key.			be manually
			entered into the
			printer now.

I-Class 75