Datamax I-4208, I-4206 manual Updating from the Download Mode

5.4.2Updating from the Download Mode

Required Update Procedure for Application Version 2.08 or earlier*

Step	Displayed Message	Operator Action	Comment(s)
1		Press and hold the	The Boot Loader version
	CPPU.QB21
	13/19!3022011	PAUSE and TEST	is displayed.
		Keys while turning	; Note: This information
		‘On’ the printer to	will vary with the printer
		enter the Download	model and Boot Loader
		Mode.	version.
2		Using the DOS	The printer is ready to
	VQEBUF!TPGUXBSF
	TFOE!TPGUXBSF	copy command,	accept the new application
		copy the filename	version.
		to the printer (for
			; Note: The parallel port
		an example see	(LPT1) must be used to
		‘Comment’ Step 1	write to the printer.
		in Section 5.4.1).
3		No action required.	The printer is receiving
	VQEBUF!TPGUXBSF
	SFBEJOH!JNBHF		the new image (program).
4		No action required.	The program has been
	FSBTJOH!GMBTI
	TPGUXBSF!JNBHF		received and verified;
			now memory is being
			cleared of the previous
			application.
5		No action required.	The new program is being
	XSJUJOH!GMBTI
	TPGUXBSF!JNBHF		written into Flash
			memory. Upon
			completion, the printer
			will automatically reset
			and start the new
			application.
			; Note: If ‘Uncalibrated’
			is displayed, the printer
			must be calibrated (see
			Section 5.0).

*This can also be used as an alternate download method for all other version levels.

I-Class 85