Input Power and Connection Requirements

Once connected, use a volt meter to ensure that the center pin on the DC jack is positive (+) 12 volts and with specifications for input voltage.

Note: DO NOT connect to the printer if the center is not positive 12 volts. You will damage the printer.

Cigarette Lighter Adapter

(part # 510116-000)

You can connect the cigarette lighter adapter to any universal 12 volt cigarette lighter plug.

If you want the printer to operate when the vehicle is turned off, make sure the cigarette lighter adapter is powered when the vehicle power is off. If the printer does not operate from the cigarette lighter adapter, check the fuse. You can replace the fuse with a Bussman 250 volt 7 amp fuse.

Cigarette Lighter Adapter Fuse

Cigarette Lighter Adapter

Datamax-O’Neil VMP-2000 Installation Guide

11

 

Page 13
Image 13
Datamax VMP-2000 manual Cigarette Lighter Adapter