Input Power and Connection Requirements
Input Power and Connection Requirements
The VMP printer comes with one 12 volt DC jack cable with white collar or tag (external).
12 Volt DC Jack Cable (white) |
| |
|
|
|
Cable | Power applied |
|
12 volt white cable | Unit will run from vehicle power; however, it could reset if there are voltage dips and fluctua- | |
(primarily used in | tions |
|
vehicles) |
|
|
|
|
|
|
|
|
Input Power Specifications |
| |
Input voltage |
| 12 - 15.5 volts |
|
| |
Maximum power consumption: |
| |
Printer is on and printing | 5 Amps | |
Printer is asleep and not charging | .05 Amps | |
|
|
|
Note: Connecting to voltage usage outside of the specifications will damage the printer.
1The mating connection to the VMP printer is a DC plug, 2.5mm x 5.5mm x 11 or 12.0mm in length.
2The center pin on the plug is positive (+). The center pin on the barrel is negative
3If a molded DC plug cable is purchased to connect to the printer, limit its length to 12 inches, due to voltage drops.
8 | |
|
