Datamax VMP-2000 manual Power Supply, Guidelines, Requirements

Data Connection

Power Supply

The VMP can run solely from a power supply. For more information, see Input Power and Connection Requirements on page 8. Use only the Datamax-O’Neil approved power supply.

Power Supply

Requirements

•Use the Datamax-O’Neil recommended power supply. FAILURE TO USE A DATAMAX-

ONEIL WILL RESULT IN DAMAGE TO THE PRINTER OR THE PRINTER WILL NOT OPERATE PROPERLY.

Note: The operating temperature of this portable printer is 50° C. However, the operating temperature when used with Datamax-O’Neil power supply for charging the portable printer is limited to 35° C. Please charge the printer in a suitable location that meets this temperature requirement.

Guidelines

•Do not install cables or connections near wet areas.

•Do not install cables near, or around, sharp edges.

•Do not install cables near heat sources.

•Do not install cables at “pinch locations” (for example, near doors or under a seat).

Datamax-O’Neil VMP-2000 Installation Guide 13