Mounting Requirements
Mounting Requirements
19”
9”
4.5”
(without
bracket)
3.5”
12 - 15”
Use the following information as a guide for orienting and/or mounting your printer:
1Before mounting the VMP printer, review the documentation supplied with the bracket you choose to use.
2The VMP printer can only be mounted based on the angles shown above. Mounting the printer outside of these angles results in the printer jamming.
3When possible, secure the hardware to the metal bulkhead or to internal metal vehicle components.
4Use Loctite to mount the brackets (contact Loctite for applicable installation information).
5Position the printer with adequate room to open the printer and for the paper to exit.
6Place the printer near the power source (for more information, see Power Cable Requirements on page 9).
6 | |
|
