Dayton Installation, Operation, Maintenance and Parts Manual
Models 3E132 thru 3E134, 3E460 thru 3E462, 5VD57 thru 5VD66, 3VH34 thru 3VH37
Parts Listing
Chart 4.2 - Direct Spark Control Components
Part No. | Description | Voltage |
Combination gas valve, natural gas | 25V | |
Combination gas valve, natural gas | 120V | |
Combination gas valve, propane gas | 25V | |
Combination gas valve, propane gas | 120V | |
Main burner electrode | 25V, 120V | |
25V circuit board | 25V | |
Wiring harness for | 25V | |
120V circuit board | 120V | |
Wiring harness for | 120V | |
High voltage ignition wire | 25V, 120V | |
Low voltage ignition wire | 25V, 120V |
Chart 4.3 - Miscellaneous Core Components
Part No. | Description | Part No. | Description |
Manifold (specify 1, 2 or 3) | Short rayhead rod | ||
Upper frame | |||
Heat shield (specify 1, 2 or 3) | Brass gas orifice (specify model number) | ||
Flash shield (specify 1, 2 or 3) | 3/8” flex conduit | ||
Reflector End (specify 1, 2 or 3) | 3/8” conduit attachment fitting | ||
Full Reflector Assembly (specify 1, 2 or 3) | Electrode mounting bracket | ||
Side frame | Red Rubber Spark Boot | ||
Side frame insert | Low volt black wire grommet | ||
Embossed reflector sides | High volt black wire heyco grommet | ||
Rayhead with center support | |||
Rayhead no center support | #20tpi 1/4” x 1/2” Machine Screw | ||
| (3E460 and 5VD62 only) |
|
|
#20tpi 1/4” x 1/2” - Hex Nut (mates to | |||
Long rayhead rod | 1/4 - 20 x 1/2” |
# Reference proper part number when ordering these parts: |
| ||
! WARNING | |||
1 | = 3E132, 3E460, 5VD61, 5VD62 | ||
2 | = 3E133, 3E461, 5VD63, 5VD64 |
| |
Contact factory for conversion | |||
3 | = 3E134, 3E462, 5VD65, 5VD66 | ||
assistance.
Note: Gas type conversions require gas valve, gas orifice among other changes. Conversion may also require burner and crossover changes.
®
E
N G L I S H
23
