Dayton 3VH37 manual For Your Safety If you smell gas, Dayton High-IntensityHeaters, Description

Installation, Operation, Maintenance and Parts Manual	3E132 thru 3E134, 3E460 thru 3E462,
	5VD57 thru 5VD66, 3VH34 thru 3VH37

Please read and save these instructions. This heater must be installed and serviced by trained gas installation and service personnel only! Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain these instructions for future reference.

Dayton® High-Intensity Heaters

Description

Dayton high-intensity heaters become highly efficient generators of infrared radiation by heating a ceramic refractory material to incandescence. The principal operation is to pass a gas-air mixture through a perforated ceramic refractory, and ignite it on the refractory surface. This causes the ceramic material to be heated to approximately 1780°F and generate large amounts of infrared radiation that may be directed anywhere heat is desired. Infrared radiation heats people and objects it strikes and not the intervening air. Included is a direct spark ignition system, manifold pressure tap, porous ceramic grids, a polished aluminum reflector and a chain set for hanging the heater. Typical applications are loading docks, warehouses, service garages, factories, aircraft hangars, etc.

! WARNING ! WARNING

E

N G L I S H

Improper installation, adjustment, alteration, service or maintenance can

cause property damage, injury or death. Read and understand the installation,

operating and maintenance instructions thoroughly before installing or servicing this equipment.

This heater must be installed and serviced by trained gas installation and service personnel only. Failure to comply could result in personal injury, asphyxiation, death, fire and/or property damage.

!WARNING

Not for residential use!

This heater is not approved in any

residential application. This includes (but is not limited to) the home, living

quarters, attached garages, etc. Installation in residential indoor spaces may result in property damage, serious injury or death.

In locations used for the storage of combustible materials, signs must be posted to specify the maximum permissible stacking height to maintain

the required clearances from the heater to the combustibles. Signs must either be posted adjacent to the heater thermostats or in the absence of such thermostats, in a conspicuous location.

For Your Safety

If you smell gas:

•Do not try to light any appliance.

•Do not touch any electrical switch.

•Do not use any phone in your building.

•Immediately call your gas supplier from a neighbor’s phone.

•Follow the gas supplier’s instructions.

•If you cannot reach your gas supplier, call the fire department.

Keep these instructions for future reference.

Form 5S4078	Printed in U.S.A.	®
	03460
	1006/281/VCPVP