BURNER ADJUSTMENTS

Grill Burner Air Adjustment:

Each grill burner is tested and adjusted at the factory prior to shipment; however, variations in the local gas supply or a conversion from one gas to another may make it necessary to adjust the burners. The flames of the burners (except the rotisserie burner) should be visually checked and compared to that of the drawing in Fig.07 and Fig. 08. Flames should be blue and stable with no yellow tips, excessive noise or lifting. If any of these conditions exist, check if the air shutter or burner ports are blocked by dirt, debris, spider webs, etc. Proceed with air shutter adjustment. The amount of air which enters a burner is governed by a sheet metal cup at the inlet of the burner called an air shutter. It is locked in place by a set screw which must be loosened prior to lighting the burner for adjustment.

To Adjust:

1.Be careful as the burner may be very hot.

2.If the flame is yellow, indicating insufficient air, turn the airshutter counterclockwise to allow more air to the burner.

3.If the flame is noisy and tends to lift away from the burner, indicating too much air, turn the air shutter clockwise.

4.Once adjusted turn the burner off and reverse steps to reassemble.

LOW SETTING ADJUSTMENTS:

The valves on the grill feature an adjustable low setting. Due to fluctuations in gas pressure, heating value or gas conversion, you may feel it necessary to increase or decrease gas flow in the low position. We do not recommend adjusting the infrared rotis burner.

To Adjust:

1.Light the burner.

2.Turn the control knob to the lowest setting (all the way counter-clockwise).

3.Remove the knob.

4.While holding the valve shaft with pliers, insert a thin, flat tipped screwdriver into the shaft and while viewing the

burner adjust to a minimum stable flame (Fig. 09).

FIG.09 Low Setting Adjustment

 

WARNING: IMPORTANT!

Before lighting, inspect the gas supply piping or hose prior to turning the gas "on". If there is evidence of cuts, wear, or abrasion, it must be replaced prior to use.

14

Page 15
Image 15
DCS BGB36-BQAR manual Burner Adjustments, Grill Burner Air Adjustment, To Adjust, LOW Setting Adjustments

BGB36-BQAR specifications

The DCS BGB36-BQAR is a premium built-in gas barbecue grill that flawlessly combines functionality with sophisticated design, offering grilling enthusiasts an unparalleled cooking experience. This grill is tailored for those who are serious about outdoor cooking, providing innovative features that elevate the grilling process to a new level.

One of the standout characteristics of the DCS BGB36-BQAR is its powerful heating capabilities. Equipped with four high-performance burners that produce an impressive total of 60,000 BTUs, this grill ensures quick heat-up times and optimal temperature control. Each burner is designed to deliver consistent flame distribution, allowing for precise cooking temperatures across the grilling surface.

The grill boasts a spacious cooking area of 726 square inches, making it ideal for entertaining and preparing meals for large gatherings. The cooking surface comprises heavy-duty stainless steel grates that provide excellent heat retention and easy cleaning properties. These grates are designed to leave beautiful sear marks on meats, enhancing presentation and flavor profiles.

In addition to the main grilling surface, the DCS BGB36-BQAR features a convenient infrared rotisserie burner, perfect for slow-roasting meats to perfection. This technology ensures even heat distribution, producing juicy, flavorful dishes every time. The built-in rotisserie kit allows cooks to easily prepare whole chickens or roasts with minimal effort.

Another prominent technology incorporated in this grill is the ceramic ignition system, which ensures reliable start-up every time. This feature eliminates the frustration of dealing with traditional ignition systems and provides peace of mind while grilling. Combined with the grill's robust construction, which includes a double-lined hood for heat retention and longevity, the DCS BGB36-BQAR is built to last.

User convenience is further enhanced by the integrated grease management system, which collects drippings and minimizes flare-ups. It also features built-in LED lights that illuminate the cooking surface, allowing users to grill comfortably even in low-light conditions.

In summary, the DCS BGB36-BQAR is an exceptional grill that marries cutting-edge technology with thoughtful design elements. With its high BTU output, generous cooking space, advanced ignition system, and thoughtful features like the rotisserie burner and grease management, it caters to both novice and experienced grilling aficionados, making outdoor cooking a truly enjoyable experience.