Danish Interpretation Systems

Installation Manual

-CONNECTSTRING "connectstring"

Use this parameter to specify the database the CUI shall connect

 

to. Valid ‘connectstring’ entry is

 

Provider=SQLOLEDB.1;Initial Catalog=SW6000-1;Data

 

Source=bkk-chn-

 

lap\SW6000;uid=SW6K11;password=HmAeC2005;Timeout=30;

-CREATELOGS

Will cause logs to be created.

-ALLMICOFF

Use this parameter to enable an All microphone Off command to

 

be send to indicate that the number of microphones “On” is zero.

 

This command is only sent when the last microphone is switched

 

off.

No ‘Windows’ logon

For the CUI and the CUA application, it is normally not desirable to have the standard ‘Windows logon’. To avoid the windows logon, do the following:

Automatic logon in XP for a PC not joined to a domain

A description in how to correct the fault can be found below or at http://support.microsoft.com/kb/315231/en-us:

1 Click Start, and then click Run.

2.In the Open box, type control userpasswords2, and then click OK.

3.Clear the "Users must enter a user name and password to use this computer" check box, and then click Apply.

4.In the Automatically Log On window, type the password in the Password box, and then retype the password in the Confirm Password box.

5.Click OK to close the Automatically Log On window, and then click OK to close the User Accounts window.

Automatic logon in XP for a PC joined to a domain

A description in how to correct the fault can be found below or at http://support.microsoft.com/kb/315231/en-us:

Important If you turn on autologon, using Windows XP becomes more convenient. However, using this feature can pose a security risk.

Warning If you use Registry Editor incorrectly, you may cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that you can solve problems that result from using Registry Editor incorrectly. Use Registry Editor at your own risk.

If you set a computer for automatic logon, anyone who can physically gain access to the computer can also gain access to everything that is on the computer, including any network or networks that the computer is connected to. Additionally, if you turn on automatic logon, the password is stored in the registry in plain text. The specific registry key that stores this value is remotely readable by the Authenticated Users group. Therefore, only use this setting if the computer is physically secured and if you make sure that users who you do not trust cannot remotely see the registry.

1Click Start, click Run, type regedit, and then click OK

2Locate the following registry key:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsNT\CurrentVersion\Winlogon

44

Manual 01 19 60011

Page 44
Image 44
DCS SW 6000 installation manual No ‘Windows’ logon, Automatic logon in XP for a PC not joined to a domain

SW 6000 specifications

The DCS SW 6000 is a state-of-the-art software-defined radio that stands out in the aviation and telecommunications sectors for its impressive capabilities and advanced features. Designed for both military and commercial applications, the DCS SW 6000 provides unparalleled flexibility and performance, making it an essential tool for modern communication systems.

One of the primary features of the DCS SW 6000 is its robust software architecture, which enables real-time reconfiguration to support various communication protocols and bandwidths. This adaptability allows users to switch between different communication modes with ease, ensuring seamless integration into diverse operational scenarios.

Another critical characteristic of the DCS SW 6000 is its superior signal processing capabilities. Equipped with advanced algorithms, the radio can effectively filter noise and enhance signal quality, allowing for clearer communication even in challenging environments. This feature is particularly valuable in military applications, where the clarity and reliability of communication can be paramount to mission success.

The DCS SW 6000 also incorporates cutting-edge encryption technologies, ensuring that all transmitted data remains secure. This is especially important in military communications, where sensitive information must be protected from interception. The integration of robust encryption protocols makes the DCS SW 6000 a trustworthy option for any organization prioritizing data security.

Moreover, the DCS SW 6000 is designed for interoperability. It can communicate seamlessly with legacy systems while also utilizing the latest in digital communications technology. This feature makes it a versatile solution, enabling organizations to modernize their communication systems without the need to discard existing infrastructure.

The modular design of the DCS SW 6000 allows for easy upgrades and maintenance. Users can quickly replace or enhance specific components without the necessity for complete system overhauls, reducing downtime and associated costs.

Additionally, this software-defined radio is equipped with advanced user interfaces that facilitate easy operation even in high-pressure situations. The intuitive controls and comprehensive display allow operators to quickly interpret data and respond effectively.

In conclusion, the DCS SW 6000 is a leading software-defined radio known for its flexibility, advanced signal processing, encryption capabilities, interoperability, and user-friendly design. Its versatility and reliability make it an ideal choice across various industries, solidifying its position as a crucial component in modern communication systems.