Door height adjustment
In case there is a problem with the alignment of the doors in relation to one another, they may be realigned vertically by following the steps below. Ensure that the door shelves are empty when adjusting the door height.
1.Remove the lower ventilation cover by unscrewing its screws as shown in the figure below. (See Figure B)
2.Using a screwdriver, loosen the three screws on the hinges of the lower door which you wish to lift as shown in the figure below. (Do not remove completely)
(See Figure C)
•If the freezer compartment door is lower than the fridge compartment door, bring them to the same level by turning the elevation screw on the freezer compartment side in the direction of the arrow (as illustrated in Figure D) using a M6 Allen wrench .
•If the freezer compartment door is higher than the fridge compartment door, bring them to the same level by turning the elevation screw on the freezer compartment side in the reverse direction of the arrow (as illustrated in Figure D) using an M6 Allen wrench .
After adjusting the doors to the same level with the aid of the elevation screws, ensure that the doors of the refrigerator close properly. If the doors do not close properly, this may adversely affect the efficiency of the refrigerator.
PAGE 10
