Using the Ice Dispenser
Please note, ice cubes will not be ready for the first 12 hours after switching on the refrigerator.
In case you do not need ice, such as during winter or in case you are on vacation, select the ice off function.
The Ice maker produces approximately 110 cubes of ice in 24 hours and this amount may change according to the frequency of opening of doors, refrigerator settings and power outage. Ice may be obtained from the dispenser as ice cubes or crushed ice.
It is normal to get crushed ice from the dispenser in a longer time than in getting the ice cubes.
It is normal to get crushed ice before the ice cubes drop if the crushed ice option had been selected before selecting the ice cube option.
If the ice dispenser hasn’t been used for a long time or after a power cut the ice may form clumps or if the ice has taken on a change in smell or taste then the ice must be disposed of and the icebox cleaned thoroughly.
Warnings
No ice must be added to the ice dispenser compartment. This may adversely affect the ice supply or crushing the ice.
It is normal to have a couple of ice cubes stuck together in the icebank.
Moving parts such as blades in a housing at the ice outlet of the dispenser must not be touched to avoid
injury.
Never use sharp objects to break the ice in the icebox. This may cause damage to the icebox.
Foods should never be placed into the icebox for quick cooling purposes.
When the icebox is to be removed for any reason, first press the Ice Off Button.
Ice Off
To stop ice formation, press the Ice Off button. When the Ice Off is selected, no water will be taken into the Icematic. However, already existing ice can be taken from the dispenser. To restart ice formation, Ice Off button must be pressed again.
Warning:
If you do not use the ice dispenser, do not forget to put the ice duct cover into the ring inside of the freezer door. (See. Your
Refrigerator section)
FILTER Reset Button:
The water filter should be replaced every six months. The filter reset indicator lifts if the water filter needs to be changed.
Press the filter Reset Button for 3 seconds to remove the filter reset indicator warning.
PAGE 21
