Defy Appliances 600STS, 600SSU warranty Maintenance, Lift-off oven door

Maintenance

Lift-off oven door

The oven door may be removed to improve oven access during cleaning

Grasp the open door on	Flip the retainer clasps up
both sides near the hinges	and over the hook on the
	upper hinge arm .
	Maintain upward pressure
	on the door to prevent the
	clasps from disengaging

Removing the inner door glass.

∙The glass may be removed for cleaning pur- poses by removing the two screws which hold it in place.

∙It is now possible to clean the inside of the outer glass if required.

∙Wash the glass in hot soapy water, rinse and

dry.

∙ Re-assemble by carefully locating the rubber seal in the embossed groove before fitting the glass. The glass is marked

“THIS SIDE TOWARDS OVEN”.

∙Re-fit the two securing screws.

Removing the side racks and shelves

∙ The side racks and shelves may be removed for cleaning purposes.

∙Remove the bottom bake element guard.

∙ Slide the shelf out fully against the shelf stop. ∙ Lift the shelf slightly and slide it out

∙The side racks may be removed by pulling the bot- tom stay slightly downwards thereby dislodging it

from the retainer at the bottom centre. Lift the racks free of the retaining slots in the oven wall.

∙Replace in reverse order of disassembly.

Lift the door upwards and outwards until it is free of the hinge housing

After cleaning ,refit the door

in reverse order.

9