Grease filters.
•Remove the plastic outer protective lin- ing on the grease filters before fitting them to the extractor hood.
•To fit the filters, engage the two lugs at the rear of each filter into the rectangular slots of the extractor hood frame, lift the filter and press the handle catch inwards .
•Engage the filter and release the catch.
•To remove the filter, for cleaning pur- poses, reverse the procedure described above.
Optional Carbon pad filters.
•Carbon pad filters assist in removing any unwanted cooking odours from the at- mosphere.
•If your installation ducts filtered air to the outside, the carbon pad filters are not re- quired.
•Should you require them, factory ap- proved, carbon pad filters and installation kits may be purchased from your nearest Defy service Centre or their authorised agents.
STEEL ROD REMOVED
STEEL ROD IN PLACE
GREASE FILTER
CARBON PAD FILTER
Page 5
