Whirlpool MW8650XL warranty down, Or Adding Instructions, count, d own, Changing

The COOK POWER Stgnal Lrght WIII come on and the Display WIII show two O’s

Touch COOK POWER. (If you want the hlgh Cook Power, sklp to step 10.)

The Display WIII show what you touched

This example shows 40% of full power

9.Touch a Number Pad for the Cook Power you want In the second

cycle.

wWhen you touch START, the CF3K CYCLE 1 Light will stay on while the oven IS cooking

..

in the first cycle. The COOK POWER Light will be on if you are using a Cook Power other than hrgh All other Signal Lrghts WIII go off

count	The	Display		counts down		the	cooking
down	time to show how much time IS left in the
	first	cycle.
	For	2 of every		10 seconds.		the	Display	WIII
mm	show	the	Cook		Power you selected,			II you
	are	using	a	Cook	Power	other	than	high.

You will hear a beep at the end of the first Cycle. You can either open the door to check the food, or you can let the oven start the second cycle If you do open the door, lust close it and push START to restart the oven.

The COOK CYCLE 2 Light will be on during

the second cycle The COOK POWER Lrght WIII also be on if you are usrng a Cook Power other than high All other ltghts WIII be off.

count	The Display		counts	down the cooking	trme
d own	to show	how much		time IS left In the
	second	cycle

For 2 of every 10 seconds. the Display WIII

show the Cook Power you selected, If you are using a Cook Power other than high

When the last cycle ends you WIII hear 4

beeps [You can stop the beeping by

opening the door or by touching CANCEL )

When the beeping stops, the Display WIII show only the colon ( )

CHANGING		OR ADDING INSTRUCTIONS
	You can	change	ttmes,	Cook	Powers,	or add	COOK	CYCLE	2 at	anytime	durrng oven
operation
1	Touch	the Cook	Cycle	you	wish to change		or add	(COOK	CYCLE 1 or 2)
2	Touch	numbers	for new	time	of desired
3	Touch COCK POWER, If desired
4	Touch	number	for new	Cook	Power,	or touch	COOK	POWER	again	If high	IS desired
5	Touch	START.

11