Delfield 536-SR68 & 536-SRR68 manual Labor of 2 Hours to Replace

Models: 536-SR68 & 536-SRR68

1 12
Download 12 pages 56.84 Kb
Page 7
Image 7

Dual View Series Service and Installation Manual

Standard Labor Guidelines To Repair Or Replace Parts On Delfield Equipment

Advice and recommendations given by Delfield Service Technicians do not constitute or guarantee any special coverage.

A maximum of 1-hour is allowed to diagnose a defective component.

A maximum of 1-hour is allowed for retrieval of parts not in stock.

A maximum travel distance of 100 miles round trip and 2-hours will be reimbursed.

Overtime, installation/start-up, normal control adjustments, general maintenance, glass breakage, freight damage, and/or correcting and end-user installation error will not be reimbursed under warranty unless pre-approved with a Service Work Authorization from Delfield. You must submit the number with the service claim.

LABOR OF 1-HOUR IS ALLOWED TO REPLACE:

Circulating Fan Motor and Blade

Compressor Start Components and Overload Protector

Condensate Element

Door Hinges, Locks, and Gaskets

Evaporator/Condenser Fan Motor and Blade

LABOR OF 2 HOURS TO REPLACE:

Heating Element

Locate/Repair Leak

Pressure Control

LABOR OF 3 HOURS TO REPLACE:

Condenser or Evaporator Coil

Expansion Valve

LABOR OF 4 HOURS TO REPLACE:

• Compressor

This includes recovery of refrigerant and leak check.

$55.00 maximum reimbursement for refrigerant recovery (includes recovery machine, pump, torch, oil, flux, minor fittings, solder, brazing rod, nitrogen, or similar fees.)

REFRIGERANTS

• R404A A maximum of $15.00/lb. or &1.00/oz. will be reimbursed.

Delfield®

For customer service, call (800) 733-8829, (800) 733-8821, Fax (989) 773-3210, www.delfield.com

 

Page 7
Image 7
Delfield 536-SR68 & 536-SRR68 manual Labor of 2 Hours to Replace