Delkin Devices MultiMedia Card to Floppy Disk Adapter FlashPath Floppy Adapter for MultiMediaCard

FlashPath Floppy Adapter for MultiMediaCard DDFLSPTH2-AD

Inserting a MultiMediaCard

Insert the MultiMediaCard into the FlashPath with the gold contacts facing toward the black plastic back and away from the metallic cover. Gently push the card until it is flush with the edge of the FlashPath Adapter. (See figure 1)

Metal face of FlashPath

Figure 1:	Insertion slot on notched edge
Inserting the
MultiMedia
Card

Label side up;

Contact side down

Installing new Batteries in FlashPath

The FlashPath is packaged with batteries pre-installed. When the batteries run out, replace them with new ones. Always replace both batteries at the same time.

1.Place the FlashPath on a flat surface with the black plastic surface facing up.

2.Gently press down on the battery cover, turning it counter-clockwise until the notch on the battery cover aligns with the unlocked position. Lift the cover off. Repeat for second battery cover.

3.Remove the old batteries and replace them with two CR2016 Lithium batteries. Make sure that the (+) poles of the batteries face upward. Replace the battery covers. (See figure 2)

	Counter-clockwise to unlock
	Clockwise to lock
Figure 2:
Installing	Lithium button
New
Batteries	battery (CR2016)

Page 2 Delkin Devices User’s Manual