Delkin Devices SensorScope System manual Canon 1DS Mark, Fuji S1, Fuji S2

Canon 1DS Mark II

•Make sure the battery is fully charged. •Turn the power on.

•Press and hold the Menu button and turn the dial to the tool2 menu. •Release the Menu button to select the tool2 menu.

•Press and hold the Select button and turn the dial to Sensor Cleaning. •Release the Select button to select Sensor Cleaning.

•Press and hold the Select button and turn the dial to OK. •Release the Select button to select OK.

•Press the shutter button. The mirror will lock up and the shutter will remain open until the power is turned off.

•Remove the camera lens.

•Turning the power off will reset the mirror and shutter.

FUJI

Fuji S1

•Make sure the battery is fully charged. •Set the exposure mode dial to M.

•Press and hold the self-timer and AE-L buttons and turn the power on. •Press the shutter button. The mirror will lock up and the shutter will remain open until the power is turned off.

•Remove the camera lens.

•Turning the power off will reset the mirror and shutter.

Fuji S2

•Make sure the battery is fully charged. •Set the exposure mode dial to M.

•Set the release mode switch to single-frame.

•Press and hold the Synchro and LCD Illumination buttons and turn the power on.

•Press the shutter button. The mirror will lock up and the shutter will remain open until the power is turned off.

•Remove the camera lens.

•Turning the power off will reset the mirror and shutter.

18