Delkin Devices SensorScope System manual Fuji S3, Konica Minolta Maxxum 5D, Maxxum 7D

Fuji S3

•Make sure the battery is fully charged. •Set the exposure mode dial to M.

•Set the release mode switch to single-frame.

•Press and hold the Synchro and LCD Illumination buttons and turn the power on.

•Press the shutter button. The mirror will lock up and the shutter will remain open until the power is turned off.

•Remove the camera lens.

•Turning the power off will reset the mirror and shutter.

Konica Minolta

Maxxum 5D

•Make sure the battery is fully charged. •Set the camera to M mode.

•Turn the power on and press the Menu button. •Scroll to the tools3 menu and highlight Clean CCD.

•Press the right arrow to bring up an Enter button and press the Enter button.

•Press the left arrow to highlight Yes and press the Enter button •The mirror will lock up and the shutter will remain open until the power is turned off.

•Remove the camera lens.

•Turning the power off will reset the mirror and shutter.

Maxxum 7D

•Make sure the battery is fully charged. •Set the camera to M mode.

•Turn the power on and press the Menu button. •Scroll to the tools3 menu and highlight Clean CCD.

•Press the right arrow to bring up an Enter button and press the Enter button.

19