Dell 1150 manual Display Bezel

1pull-tab

2display assembly

3M2.5 x 5-mm screws (4)

4hinge brackets (2)

5computer base

11.Lift the display assembly up and out of the computer base.

Display

1screw covers (2) display bumpers (3)

2	M2.5 x 5-mm screws (5)
3	display bezel
4	display panel
5	M2 x 3-mm screws (8)
6	top cover
7	display-feed flex cable

Display Bezel

CAUTION: Before performing the following procedures, read the safety instructions in your Owner's Manual.

CAUTION: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer's electronic components. You can do so by touching an unpainted metal surface.

1.Follow the instructions in "Before Working Inside Your Computer."

2.Remove the keyboard.

3.Remove the display assembly.

4.Use a plastic scribe to pry the two screw covers and three display bumpers out of the screw holes located on the front of the bezel.

5.Remove the five M2.5 x 5-mm screws located on the front of the bezel.