4.Press any key to start the Dell Diagnostics from the diagnostics utility partition on your hard drive.

Starting Dell Diagnostics From the Drivers and Utilities Media

NOTE: Your computer may or may not have an optical drive. Use an external optical drive or any external storage device for the procedures that involves media.

1.Insert the Drivers and Utilities media.

2.Shut down and restart the computer. When the DELL logo appears, press <F12> immediately.

NOTE: If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft® Windows® desktop; then, shut down your computer and try again.

Using Support Tools

NOTE: The next steps change the boot sequence for one time only. On the next start-up, the computer boots according to the devices specified in the system setup program.

3.When the boot device list appears, highlight CD/DVD/CD-RWand press <Enter>.

4.Select the Boot from CD-ROMoption from the menu that appears and press <Enter>.

5.Type 1 to start the CD menu and press <Enter> to proceed.

6.Select Run the 32 Bit Dell Diagnostics from the numbered list. If multiple versions are listed, select the version appropriate for your computer.

7.When the Dell Diagnostics Main Menu appears, select the test you want to run.

27

Page 29
Image 29
Dell PP38L, 1410, Y727H setup guide Type 1 to start the CD menu and press Enter to proceed