Dell 1440 Power Button Board

Back to Contents Page

 Power Button Board

Dell™Inspiron™1440ServiceManual

Removing the Power Button Board

Replacing the Power Button Board





1. Follow the procedures in Before You Begin.



2. Remove the battery (see Removing the Battery).



3. Remove the center control cover (see Removing the Center Control Cover).



4. Remove the keyboard (see Removing the Keyboard).



5. Release the power button board cable lock and disconnect the power button board cable from the system board connector.



6. Using a plastic scribe, pry out the power button board to release it from the palm rest.



7. Lift the power button board off the palm rest.



1. Align the holes on the power button board with the protrusion on the palm rest and keep it in place.



2. Slide the power button board cable into the connector on the system board. Press down the power button board cable lock to secure the cable to the

system board connector.



WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface.

CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™

is not covered by your warranty.

CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the

computer.

CAUTION: The power button board is glued to the palm rest. Do not pull on the power button board cable to remove the power button board.

power button board

power button board connector

power button board cable lock

