Back to Contents Page
Camera (Optional)
Dell™Inspiron™1440ServiceManual
Removing the Camera
Replacing the Camera

Removing the Camera

1. Follow the procedures in Before You Begin.
2. Remove the display assembly (see Removing the Display Assembly).
3. Remove the display bezel (see Removing the Display Bezel).
4. Disconnect the camera cable from the connector on the camera module.
5. Release the camera module from the latches on the display cover.
6. Remove the camera module.

Replacing the Camera

1. Secure the camera module using the latches on the display cover.
2. Connect the camera cable to the connector on the camera module.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on the back of the computer).
CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™
is not covered by your warranty.
CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the
computer.
1
latches (2)
2
camera cable connector
3
camera module