Dell 1564 Display

Back to Contents Page
 Display
Dell™Inspiron™1564ServiceManual
Display Assembly
Display Bezel
Display Panel
Display Panel Brackets
Display Hinges
Display Cable




Display Assembly

Removing the Display Assembly

1. Follow the procedures in Before You Begin.

2. Remove the battery (see Removing the Battery).

3. Remove the module cover (see Removing the Module Cover).

4. Disconnect the Mini-Card antenna cables (see step 4 in Removing the Mini-Card).

5. Note of the routing of the Mini-Card antenna cables and remove them from the routing guides on the bottom of the computer.

6. Remove the two screws on the bottom of the computer that secure the display assembly to the computer base.

7. Remove the power button panel (see Removing the Power Button Panel).

8. Remove the keyboard (see Removing the Keyboard).

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™
is not covered by your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface.
CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the
computer.
1
screws (2)
2
Mini-Card antenna cable routing