Dell 1564 Replacing the Optical Drive Board

Replacing the Optical Drive Board

1. Follow the procedures in Before You Begin.

2. Use the alignment posts on the computer base to correctly place the optical drive board.

3. Replace the two screws that secure the optical drive board to the computer base.

4. Slide the optical drive board cable into the connector on the optical drive board, and press down on the connector latch to secure the cable.

5. Replace the palm rest (see Replacing the Palm Rest).

6. Replace the keyboard (see Replacing the Keyboard).

7. Replace the power button panel (see Replacing the Power Button Panel).

8. Replace the module cover (see Replacing the Module Cover).

9. Replace the optical drive (see Replacing the Optical Drive).

10. Replace the battery (see Replacing the Battery).

Back to Contents Page

CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.