Dell 1564 Camera Module

Back to Contents Page
 Camera Module
Dell™Inspiron™1564ServiceManual
Removing the Camera Module
Replacing the Camera Module




Removing the Camera Module

1. Follow the procedures in Before You Begin.

2. Remove the battery (see Removing the Battery).

3. Remove the display assembly (see Removing the Display Assembly).

4. Remove the display bezel (see Removing the Display Bezel).

5. Remove the display panel (see Removing the Display Panel).

6. Peel the camera module off the display cover.

7. Remove the tape that secures the camera cable to the camera module.

8. Disconnect the camera cable from the camera module.
Replacing the Camera Module

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™
is not covered by your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on the back of the computer).
CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the
computer.
NOTE: The color of the tape on the camera module may vary depending on your computer model.
1
display cover
2
alignment posts (2)
3
camera module
4
tape
5
camera cable

