Dell 1564 - page 57


1. Follow the procedures in Before You Begin.

2. Align the connectors on the USB/audio board with the slots on the computer base.

3. Use the alignment posts on the computer base to correctly place the USB/audio board.

4. Replace the screw that secures the USB/audio board to the computer base.

5. Slide the USB/audio cable into the connector on the USB/audio board, and press down on the connector latch to secure the cable.

6. Replace the palm rest (see Replacing the Palm Rest).

7. Replace the keyboard (see Replacing the Keyboard).

8. Replace the power button panel (see Replacing the Power Button Panel).

9. Replace the module cover (see Replacing the Module Cover).

10. Replace the optical drive (see Replacing the Optical Drive).

11. Replace the battery (see Replacing the Battery).

Back to Contents Page

CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.