Back to Contents Page
Inverter
Dell Studio One 19/1909 Service Manual
Removing the Inverter
Replacing the Inverter
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
Removing the Inverter
1.Follow the procedures in Before You Begin.
2.Remove the computer cover (see Removing the Computer Cover).
3.Remove the shield (see Removing the Shield).
4.Remove the stand (see Removing the Stand).
5.Remove the back I/O panel (see Removing the Back I/O Panel).
6.Remove the processor fan and heat sink (see Removing the Heat Sink and Removing the Processor Fan).
7.Remove the right speaker (see Removing the Right Speaker).
8.Remove the optical drive (see Removing the Optical Drive).
9.Remove the two screws that secure the inverter to the chassis.
10.Disconnect the inverter cable from the inverter.
11.Disconnect the two cables that connect the inverter to the LCD panel.
12.Lift the inverter out of the chassis.
1 | screws (2) | 2 | cables to the LCD panel (2) |
|
|
|
|
|
|
3 | inverter cable |
|
|
|
|
|
|
|
|
|
|
|
|
|
