Back to Contents Page
Webcam
Dell Studio One 19/1909 Service Manual
Removing the Webcam
Replacing the Webcam
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the computer stand).
Removing the Webcam
1.Follow the instructions in Before You Begin.
2.Remove the system board (see Removing the System Board).
3.Remove the support assembly (see Removing the Support Assembly).
4.Remove the two screws that secure the webcam to the LCD panel.
5.Disconnect the cable to the webcam.
6.Lift the webcam away from the LCD panel.
| 1 | webcam cable | 2 | screws (2) |
|
|
|
|
|
|
|
Replacing the Webcam
1.Follow the instructions in Before You Begin.
2.Reconnect the cable to the webcam.
3.Replace the two screws that secure the webcam to the LCD panel.
4.Replace the support assembly (see Replacing the Support Assembly).
5.Replace the system board (see Replacing the System Board).
Back to Contents Page
