Back to Contents Page
Shield
Dell Studio One 19/1909 Service Manual
Removing the Shield
Replacing the Shield
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
Removing the Shield
1.Follow the procedures in Before You Begin.
2.Remove the computer cover (see Removing the Computer Cover).
3.To remove the shield loosen the eight captive screws that secure the shield to the computer.
1 | captive screws (8) | 2 | shield |
|
|
|
|
|
|
|
|
|
|
|
Replacing the Shield
1. Follow the procedures in Before You Begin.
NOTE: Before replacing the shield, ensure that all the cables are connected and that no tools or extra parts (including screws) are left inside the computer.
2.Position the shield over the computer and tighten the eight captive screws.
3.Replace the computer cover (see Replacing the Computer Cover).
Back to Contents Page
