Processor L2 Cache | Displays the processor L2 cache size. |
Memory Installed | Indicates the amount of installed memory in MB. |
|
|
Memory Available | Indicates the amount of memory available in MB. |
|
|
Memory Speed | Indicates the memory speed in MHz. |
|
|
Standard CMOS Features |
|
|
|
System Time | Displays current time in hh:mm:ss format. |
|
|
System Date | Displays the current date in mm:dd:yy format. |
|
|
AHCI Port0 | Auto detects IDE devices in port 0. |
|
|
AHCI Port1 | Auto detects IDE devices in port 1. |
|
|
Advanced BIOS Features |
|
CPU Feature | Describes type of processor. |
|
|
USB Device Setting | Enable or disable the USB controller /Set the operational USB speed. |
|
|
Advanced Chipset Features |
|
|
|
Onboard Audio Controller | Allows you to enable or disable the audio controller. |
|
|
SATA Mode select | Allows you to switch between AHCI and IDE. |
|
|
Onboard LAN Controller | Allows you to enable or disable onboard Broadcom network controller. |
Onboard LAN Boot ROM | Allows you to enable or disable ROM for Broadcom PCI E Network Controller. |
|
|
Boot Device Configuration |
|
|
|
Boot Settings Configuration | Enable or disable fast boot and Numlock key. |
|
|
Hard Disk Boot Priority | Sets the hard drive boot priority. The items displayed are dynamically updated according to the hard drives detected. |
|
|
1st Boot Device | Specifies the boot sequence from the available devices. |
| Removable; CD/DVD; Hard Drive; Disabled (Removable by default). |
|
|
2nd Boot Device | Specifies the boot sequence from the available devices. |
| Removable; CD/DVD; Hard Drive; Disabled (CD/DVD by default). |
|
|
3rd Boot Device | Specifies the boot sequence from the available devices. |
| Removable; CD/DVD; Hard Drive; Disabled (CD/DVD by default). |
|
|
Boot Other Device | Allows you to boot through any other device. |
|
|
Power Management Features |
|
|
|
ACPI Suspend Type | Specifies the suspend type. The default is S3. |
|
|
C1E Support | This option allows you to enable or disable the "Enhanced Halt State". |
Remote Wake Up | This option turns on the computer when a user tries to access the computer through the LAN. The default is Enabled. |
|
|
AC Recovery |
|
|
|
Auto Power On | Enables you to set an alarm to turn on the computer automatically. The default is Disabled. |
|
|
BIOS Security Features |
|
|
|
Supervisor Password | Status of supervisor password installed. |
|
|
User Password | Status of user password installed. |
Set Supervisor Password | Allows to set the desired supervisor password. |
|
|
Exit |
|
|
|
Exit Options | Provides options to Load Optimal Default, Save and Exit Setup, and Exit Without Saving. |
|
|
Boot Sequence
This feature allows you to change the boot sequence for devices.